1 cbm electric underground mining loader, Primarily used for loading operations in underground mines, it is mainly used to load mined ore or rock into transport vehicles or unload them into chute shafts. It can also be applied in tunnel construction projects to transport loose rubble generated by blasting. During the operation of electric loaders, operators must be familiar with safety precautions for electric loaders to prevent accidents caused by improper operation.

Notes:

• intenance, adjustment, and refueling must only be performed after the machine has been turned off. Additionally, the vehicle must be parked in a safe area and should not be placed in hazardous locations such as areas prone to collapse or near the edges of shafts.
• The leakage protection distribution box should be placed in a safe, dry, and well-ventilated area. The cable fixing posts must be secure.
• The emergency stop device on the fuselage must remain in good condition.
• electric loader should have good lighting. Additionally, the workplace must be adequately lit, and only 36V voltage is allowed for lighting. Open flames must never be used as a substitute for light during maintenance.
• he driver’s cabin, underground maintenance rooms, garages, etc., must always be equipped with fire extinguishing equipment and insulating gloves for operating high-voltage power sources, as well as voltage testers.
• Electric loaders must remain well-lubricated and clean overall. They should be parked in well-ventilated, dry areas with good roof support in tunnels, away from the impact of blast waves during blasting.
• When an abnormal situation is discovered at the work site, stop immediately, evacuate to a safe area, and report promptly.
• The excavator switch box must always be kept closed. Only qualified electricians are allowed to open it.