The four-dimensional transport truck is a common industrial vehicle. Tires are an important part of the four-wheeled truck. If the tire fails during use, the work will not be completed normally. Therefore, tires are very important for a four-wheeled truck. NextLet me tell you how to extend the service life of the tire.

First of all, strictly abide by the tire inflation standards. After inflation, check whether there are air leakage in each part, and check the tire pressure regularly to ensure compliance with the standards. Develop the habit of using a barometer to measure air pressure, which cannot be judged by the naked eye. Ensure that the tire has a certain elasticity, and the deformation does not exceed the specified range when it is subjected to the specified load, so as to ensure that the vehicle has good stability and comfort during driving. The air pressure of the spare tire should be charged relatively high to avoid running out of air over time.

Secondly, the tires must be correctly selected and installed, and the corresponding inner tube must be equipped according to the tire specifications. Tires assembled on the same machinery should ensure the same brand, same structure and same performance. If this cannot be done, tires of the same brand, specification, pattern and type should be assembled on the same shaft; when replacing new tires, the whole vehicle or coaxial should be replaced together; tires with directional patterns should be installed in accordance with the prescribed rolling direction; when replacing new tires, the new tire should be installed on the front wheel and the repaired tires should be installed on the rear wheel. To ensure driving safety, refurbished tires are not allowed to be used as steering wheels (front wheels).

Third, regularly transfer tires. After the vehicle is driving for a period of time, the front and rear tires will be different in terms of fatigue and wear, so they should be replaced in time according to regulations. There are two types of tire change method and cycle method. The cross-transfer method is suitable for vehicles that often travel on roads with higher arches, while the cycle method is suitable for vehicles that often travel on flatter roads.